Initial infrastructure documentation - comprehensive homelab reference

Printing/Nameplates/checkmark_template.scad

@@ -0,0 +1,56 @@
+// Two-Layer Check Mark Design
+// Black base (box + check mark) + White fill layer on top
+// Based on CF00089-08 Check Mark 01.svg
+
+// Parameters - adjust these to customize
+black_base_thickness = 0.5;    // Black base layer (thin, bottom)
+white_fill_thickness = 1.5;    // White fill layer (middle)
+black_top_thickness = 0.5;     // Black top (check mark shows through)
+desired_size = 14;             // Desired box size (mm) - makes design square
+
+// SVG file path
+svg_file = "Check-Mark/CF00089-08 Check Mark 01.svg";
+
+// Calculate dimensions from SVG viewBox (720 x 570.9)
+svg_width = 720;
+svg_height = 570.9;
+
+// Scale factors to make the design exactly square
+scale_x = desired_size / svg_width;   // Scale for width
+scale_y = desired_size / svg_height;  // Scale for height
+design_width = desired_size;
+design_height = desired_size;
+
+// White fill inset (how much smaller than the outer box)
+white_inset = 1.5;  // mm inset from edges (adjusted for 14mm box)
+white_width = design_width - (white_inset * 2);
+white_height = design_height - (white_inset * 2);
+
+// Total thickness
+total_thickness = black_base_thickness + white_fill_thickness + black_top_thickness;
+
+echo(str("Design size: ", design_width, "mm x ", design_height, "mm"));
+echo(str("White fill size: ", white_width, "mm x ", white_height, "mm"));
+echo(str("Total thickness: ", total_thickness, "mm"));
+
+// Build the two-layer design
+module checkmark_design() {
+    // Layer 1: Black base - full SVG design (box + check mark)
+    color("black")
+    translate([0, 0, 0])
+    linear_extrude(height = total_thickness)
+    // Center the SVG design
+    translate([-design_width/2, -design_height/2, 0])
+    scale([scale_x, scale_y, 1])
+    import(svg_file, center = false);
+
+    // Layer 2: White fill - sits on top of black base, inside the box
+    color("white")
+    translate([0, 0, black_base_thickness])
+    linear_extrude(height = white_fill_thickness)
+    offset(r = 1)  // Slightly round the corners
+    square([white_width, white_height], center = true);
+}
+
+// Render the complete design
+checkmark_design();